Full Bore Brass Ball Valve For Water PN 2

Full Bore Brass Ball Valve For Water PN25 Operating Instruction

1- Do not unpack the valve until installation to prevent falling of any unwanted substance that may affect the working of valve.
2- Take measures against any possible damage that may occur during transport and shipment.
3- Clean away every unwanted substance in your system before installation.
4- Valve should be off position while installing.
5- Be careful that the thread length of the part that will be installed to the valve will not be too longer or too shorter than the thread length of the valve.
6- While installing, grab the valve by the appropriate tool from the across flats where you’ll install it.
7- During installation do not use excessive adhesive or any unsuitable substance.
8- Use the valve fully open or fully closed position.
9- Do not paint the valve. Do not expose the valve with abbrasive chemicals.
10- Do not use any other tools for opening or closing the valve and do not remove the handle.
11- In case of any damage or disorder, valve should be changed by authorities.
12- Complying with the installation and usage instruction is compulsory. Otherwise, the product will be out of guarantee.
13- Do not forget to get the document of guarantee. This document is valid only with the related bill.