PPR Ball Valve

INSTALLATION and OPERATING INSTRUCTION

1- Make sure there is no damage on the product may occur during transport and shipping. Before assembly do
not unpack the product in order to prevent from the external effects.
2- Clean all kinds of contaminants before assembly.
3- Make sure that the thread length to be connected to the valve is not too short or too long than the thread
length of the valve.
4- Keep the valve in closed position during installation. Install the valve with the appropriate tool from the side
where you’ll mount it.
5- Use enough flax or plumping adhesive.
6- Use the valve full open or full closed
7- While opening and closing the valve, follow the arrows on the handle.
8- Do not paint the valve, do not expose the valve with abrasive chemicals.
9- Do not open or close with any other tool and do not remove the handle.